family life insurance-Carbon monoxide (CO) alarm
Carbon oxidation of carbon monoxide gas alarm alarm is known as an effective weapon to prevent carbon monoxide poisoning.
If you need more accessories, please see the following links in detail Note: this alarm cannot detect natural gas and liquefied petroleum gas
Carbon monoxide gas from inside the space surrounding the alarm into the machine, after testing the output of carbon monoxide density, in the air just switched on, the screen display 0 to 30 PPM is normal (1 PPM = one over one million of the air volume)
1, after installed the battery, will hear a "drop" sound, red lights flashing.(for battery installed correctly)
2, when the alarm, the red light flashing quickly, and send out alarm.Restored to monitor state (carbon monoxide concentration decreases.
3, when the standby, green indicator light flashing a 30 seconds.
4, under normal circumstances, the LED indicator light flashing a about 40 seconds.
5, such as blue backlight lights, press the "TEST" key TEST alarm emits an alarm, the red indicator light flashing, alarm is working properly.
6, the alarm with the attached screw fixed on the wall.
Install 3 battery, hang on the wall of the coal stove next to, when indoor carbon monoxide (CO) is detected after reaching a certain concentration, buzzer screeched "drops dripping" sound the alarm.
1 x screws
->If alarm store placed where the temperature is lower than 4 degrees more than 30 minutes, must be at least 12 hours to put it in room temperature environment can be used, not correct location will affect the sensitivity of the alarm in the electronic components.