Anybody who collect our product or our store has the opportunity to receive the coupons randomly. Micromake 3D Printer Heat Bed Package Include : Only Heated Bed .
If you want with power supply, pls click this link:
1.Use PLA no need the hotbed. The platform can adjust equably by Cura "Motor settingand" dialog box "Parameter". There will be no edge warping problem.
2.With the hotbed, if the contact area of the bottom is enough, set the platform equably, you can print on the glass directly without masking tape or solid gum, the bottom will very smooth.
1.Assemable the M3T type screw, M3×4 two channel copper pillar and M3×12 screw as the following pictures
2.Assemable the power wire and red black wire to the corresponding position of theamphenol connector in switching power according to the colour, please don’t leave the metal part outside!
No matter when you assemable or adjust the switching power, please be sure to remember to unplug the power cord first!
3.Install the white heating wire to hotbed amphonel connector, the red black temperature sensing wire to TB horn socket. Remember to distinguish the possitive pole and negative pole. Red in positive, black in negative.
4.The black side of hotbed is adown, adjust the angle of T type nut, put the hotbed in the right position then fix the screws. Please don’t print on the bed directly, you need put a glass platform on the hotbed, use three foldback chip to fix it.