The company receives the remote control board, suitable for anti-theft alarm, remote control electric doors and Windows, signal control, industrial control, the electric control circuit of lifting equipment and so on.Remote control switch module relay contact output independently, is very suitable for direct control of all kinds of load;Products adopt wireless fixed code technology, omnidirectional, noninterference switch.Remote control switch circuit component materials buyers can contrast220V 10A 1CH wireless remote control system .
Working Voltage: AC220V
Working Frequency : 315MHZ/433MZH
Receiver sensitivity: : -105Db
Working temperature : -10\'C - +80\'C
Output way : Momentary Toggle Latched Adjustable
Code type : Learning code
Jog/Non-Latched: press one button is working /ON. loosen your finger on the same button is stop/OFF .one channel switch need one buttons remote control
Self -lock/Self-Latched: press one button for one time is working/ON .press the same button again is stop/OFF .(one channel switch need one buttons remote control
Inter-lock /Latched : press one button is working/ON ,press another button is stop/OFF . ( one channel switchneed 2 buttons remote control
Press the learning button3 seconds, the indicator light off .then you press any buttons of the remote control to transmite signal . it means studying successfully when the indicator flash 3 times until the indicator light on.
press the learning button about 8 seconds , the indicator turn on to off to on , it means the information that you keep have been removed successfully .
Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency
4*receiver (included cover) 4* transmitter (included battery)