1. The fire helmets
2.The Fire fighting clothing
3.The Fire belt
4.The Fire gloves
5.The Fire training boots thin plate (bottom)
The Name of commodity: the fire suit
Color: orange, green
Using the environment: - 20 ° to + 200 °
Products include: fire suit, jacket, Trousers, helmet, gloves, safety belts, fire boots
Product material: wear - resisting insulation, Moisture proof fabric material
Applications: 2 for the fire fighting common protection service, also can be 2 in the factory fire equipment. The Clear roadblocks. Hot work etc.
Flame retardant performance of the on length of 12 cm or less,\'m time for 2 seconds or less, Flame retardant time of 10 seconds or less
The Name of commodity: helmets
Chinese GA44-2004 standard requirement
1. The shock absorption performance: The biggest impact is less than 3457.6 N
2. The thermal performance
3. Resistant to combustion performance: the fire, after brigade the cap shell cap shell fire put out in 5 seconds, and there is no flame through to cap shell to internal clear signs.
4. The mask: after heat test, no obvious deformation or damage.
5. The fire helmet material: ABS reinforced plastics, impact resistant, anti penetrate, flame resistant, wear device can be adjusted.
The Name of commodity: the fire gloves
Material: the outer Material with flame retardant. Resistant to acid and alkali, hold to oil, Antistatic properties to the as high strength Material.
The waterproof layer: use which has The function of waterproof and moisture permeable fabrics.
Layer: comfortable, comfortable fabric with flame retardant performance.
Features: with flame retardant insulation. Wear waterproof, high tenacity.
Style: five fingers.
Application: suitable for fire extinguishing opponents. When the wrist protection, prevent scratch and the cut
The Fire gloves for hand protection. The Dangerous homework had prevent sharp instrument properties, to as cutting and large friction coefficient. The Fire gloves, informs the as flame retardant. The outer Waterproof layer. A mix of insulating layer and the lining, Because the hand protection, flame retardant, Insulation, Waterproof performance, etc.
The Name of commodity: boots
Chinese GA6-2004 standard
1. The insulation performance: 13.6 ° or less
2. The puncture to hold: p 1560 n
3. The cutting
4. The flame retardant performance levels: FV - 1
5. Rubber boots: breakdown voltage > 5000 v
6. Oil resistant performance: - 2% to + 10%
7. Non - slip performance: 17 or more
8, the acid - proof alkaline can
The Product the introduction:
Made by reversing odontoid grain design concept, at first, a relative to the widespread adoption of outsole decorative pattern design, its non - slip performance is greatly improved. In the upper using sponge sole attaching to the company from the ordinary use to add a layer of insoles, for firefighters In jeopardy self -help jump down from a height, the buffering effect, to reduce the harm degree. The Steel plate at the end of the upper and lower two the layers are insulating layer, happens, the safety factor.
The Flame retardant performance is the main index, new firefighter protective rubber bottoms, surface, and this product has a unique performance, is above the national standard level of FV - 1, can your FV 0 level.
Size: 39-44 yards
Weight: 2 kg, with thin steel plate
Product name: safety belts. The Fire safety belt. The safety belt
Material: nylon ribbon. The metal parts.
The Features: wear - resisting Flame retardant. The Work force of 4500 n
Weight: 0.5 KG
Size: 113.5 cm long, 113.5 cm wide
Belt waist 105 cm, the smallest waist is 105 cm